Mash King Stainless Steel Thermometer 6" Probe

Mash King Stainless Steel Thermometer 6" Probe
Mash King Stainless Steel Thermometer 6" Probe
$23.99
Availability: In Stock
 

Brewing consistent beer largely depends on the accuracy of the wort temperature during the brewing process. Monitoring the temperature of the wort can easily be achieved by using a thermometer. Under high temperature, the wort can boil off too much which will eventually lead to the strong aroma and bitterness of the final brew. However, home brewers need to use the right brewing thermometer to monitor the temperature of the hot wort inside the kettle. 

The Mash King thermometer is made from stainless steel which is resistant against rust and corrosion. This thermometer features a large three-inch face made from tempered glass thus it does not easily break even under high heat. 

The thermometer is compatible with different brands and types of brew kettles and pots. It has a length of 6 5/8" with 6" of it is made up of the probe. It can be screwed directly into a 1/2" pipe thread opening. But if openings are not found in the kettle, drilling a 1/2" hole is necessary. This thermometer provides readings in both Celsius (0 to 100 C) and Fahrenheit (-10 to 220 F) for convenience. 

To install this thermometer, make sure that it is placed in an area that is away from the direct heat from the burner as it can lead to a superfluous reading. It is important for the thermometer to get the average temperature reading of the wort. 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:




Design and Development by theAlThemist
© 2013 | All rights reserved!